|
Post by wankedah on Jun 3, 2009 1:47:38 GMT 8
ni jawapan The clicking sound is significant. It indicates that the starter relay is working and the safety features/interlocks are not faulty. A few tests to try: * locate the starter motor relay by following the cable from the battery's + terminal; * remove the rubber cap/cover to expose the 2 big terminals of the relay; * verify by pressing on starter button. Click should be heard/felt on the relay; * temporarily jumper the 2 big terminals on the nuts (not on the threaded portion); * if the starter motor spins, the starter motor relay is faulty, specifically the contactors; * if the motor does not turn, then most likely a faulty starter motor, specifically the carbon brushes. Although, it is also possible for the starter motor not to spin if the engine has seized. A way to check is to engaged the bike in gear and try to turn the rear tire. If the tire/chain/transmission/engine turns, then it would be the starter motor. Good luck and thank you for using FixYa. www.fixya.com/motorcycles/t2039174-starter_motor_doesnt_operate======== tapi aku tak reti nak bukak starter motor.. ikut buku manual, nc23 kena bukak tank...carburetor esok try lain.. demit
|
|