|
Post by zul_cbr on Sept 28, 2009 20:28:19 GMT 8
salam kawan2... jom kongsi parts2 yg boleh dikacuk/ditukar antara NC23 dan NC29. FYI, NC23 stands for 88-89 CBR400RR while NC29 stands for 90-94 CBR400RR front forks (& front wheel if req.) - yes but I was under the impression the 29 forks were shorter. The adjusters on the top will swap.rear wheel - yes though you MAY have to file the rear calliper and you will need the 29 spacers. (fx110 dah buat) left & right pegs & hangers with pedals/levers - peg yes, hangers wontLeft & right clip-ons - yesbrake & clutch levers inc fluid resevoir - yesfront discs & calipers - yesexhaust end can (possibly complete system) - muffler yes, header possibly with some tweakagepickup coil - yes if you remove one of the pick ups (23 have 2, 29 only 1)credit : Mikiboy, firebeast, tanuki from 400GB.
|
|
|
Post by fx110 on Sept 28, 2009 20:40:27 GMT 8
Rectifier, Spark Plug, Fuel Pump, brake pad depan belakang.same use
|
|
|
Post by zul_cbr on Oct 26, 2009 14:21:50 GMT 8
900RR heel plates - yes
|
|
|
Post by wankedah on Oct 26, 2009 23:58:30 GMT 8
syokkkk
|
|
|
Post by zul_cbr on Oct 31, 2009 14:30:54 GMT 8
BRAKE SYSTEMS..!
Internal parts front master cylinder brake CBR400RR boleh swap dgn front master cylinder Yamaha Lagenda 110z dan front/rear master cylinder Yamaha TZM150.
they had same master cylinder Internal Diameter (I.D) which is 12.7 mm.
murah dan senang dpt parts.
sekian utk makluman.
p.s- aku sdg carik master pump brake motor apa yg sama ngn masterpump brek blkg cbr ni. aduiii...cbr punya i.d 14 mm...besar giler.
|
|
|
Post by zul_cbr on Nov 2, 2009 20:19:34 GMT 8
NC29 CDI can be swap with CB400 SF.
Important note :
You may be able to swap CDI between NC29 & CB400 but be careful as they have different max revs so you could restrict the amount of revs on one machine & quite easily blow the other up !!
NC29 red line at 14500 CB400 Red lines at 13000
so fitting NC29 CDI on CB400SF could = BANG. But SF on 29 would = SLOW if you see what I mean.
|
|
|
Post by zul_cbr on Nov 9, 2009 16:47:53 GMT 8
Most of Carburetor parts between RVF400 NC35 and NC29 are interchangeable. Including the standard and aftermarket needles.
p.s - best utk upgrade performance..!
|
|
|
Post by wankedah on Nov 10, 2009 9:40:40 GMT 8
betoi ka tudern
|
|
|
Post by zul_cbr on Dec 3, 2009 20:20:16 GMT 8
rear masterpump RVF400 NC35 sama dgn NC29, cuma beza hanya pada skru plunger brek (mechanism spring brek NC35 dan NC29 lain sikit). aku dah pakai skrg. thanks fx
|
|
|
Post by fx110 on May 5, 2010 18:01:10 GMT 8
Meter NC23 dan NC30, straight swap. Meter NC29 dan NC35, straight swap.
|
|